其實在去年8月份我做系統移植時就構建好了一個可以用的根文件系統，但是那時是跟著別人的《Linux全線移植文檔》做的。有些東西我也不清楚，只是跟著做，做出來能用就了事了，沒有深究其中的規范，以及文件系統中哪些要，哪些不要。
趁著今年過年的幾天假期，我移植重新移植了U-Boot1.3.1和Linux2.6.24到S3C2410及S3C2440后，我想好好的看看有關文件系統構建方法和規范，整理整理構建根文件系統的文檔。之后，我用了近一周的時間，慢慢研究《構建嵌入式Linux系統》這本書有關根文件系統的部分，以及一些網上的參考資料，不斷地實驗。構建好了一個精簡的根文件系統，下面我只介紹構建的過程和方法，至于原理我給出以下參考資料，自己看吧。
1、 《Linux系統移植》：一個經典的Linux移植文檔，共有95頁的PDF文檔，內容十分詳細，里面有根文件系統的創建，還多地方都有下載（有的網站稱之為《Linux系統全線移植文檔》等等），很值得參考。在這里感謝文檔的作者們。
2、 《構建嵌入式Linux系統》必看！里面對文件系統的構建講的挺細。
3、 《Filesystem Hierarchy Standard》Linux文件系統的標準規范。我只看到英文的。
其他再遇到不懂的就google，基本上都是Linux的相關知識，都是找得到的。（1）創建根文件系統的基本目錄結構。
我把這個過程做成了shell腳本(文件名為mkroot) ，很方便！ #! /bin/sh
echo "creatint rootfs dir......"
mkdir rootfs
cd rootfs
echo "making dir : bin dev etc lib proc sbin sys usr"
mkdir bin dev etc lib proc sbin sys usr #必備的8個目錄
mkdir usr/bin usr/lib usr/sbin lib/modules
# Don't use mknod ,unless you run this Script as root !
# mknod -m 600 dev/console c 5 1
# mknod -m 666 dev/null c 1 3
echo "making dir : mnt tmp var"
mkdir mnt tmp var
chmod 1777 tmp
mkdir mnt/etc mnt/jffs2 mnt/yaffs mnt/data mnt/temp
mkdir var/lib var/lock var/log var/run var/tmp
chmod 1777 var/tmp
echo "making dir : home root boot"
mkdir home root boot
echo "done"
在你想要建立根文件系統的地方，運行： [tekkamanninja@Tekkaman-Ninja nfs]$ ./mkroot
creatint rootfs dir......
making dir : bin dev etc lib proc sbin sys usr
making dir : mnt tmp var
making dir : home root boot
done
[tekkamanninja@Tekkaman-Ninja nfs]$ cd rootfs/dev/
[tekkamanninja@Tekkaman-Ninja dev]$ su
口令：
[root@Tekkaman-Ninja dev]# mknod -m 600 console c 5 1;mknod -m 666 null c 1 3;exit
exit
[tekkamanninja@Tekkaman-Ninja dev]$
（2）配置、編譯和安裝Busybox-1.9.1
[tekkamanninja@Tekkaman-Ninja source]$ tar -xjvf busybox-1.9.1.tar.bz2
修改Makefile文件： [tekkamanninja@Tekkaman-Ninja busybox-1.9.1]$ pwd
/home/tekkamanninja/working/source/busybox-1.9.1
[tekkamanninja@Tekkaman-Ninja busybox-1.9.1]$ kwrite Makefile
......(第151-154行)
#SUBARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \
# -e s/arm.*/arm/ -e s/sa110/arm/ \
# -e s/s390x/s390/ -e s/parisc64/parisc/ \
# -e s/ppc.*/powerpc/ -e s/mips.*/mips/ )
......(第174行附近)
#ARCH ?= $(SUBARCH)
#CROSS_COMPILE ?=
ARCH = arm
CROSS_COMPILE = /home/tekkamanninja/working/gcc4.1.1/gcc-4.1.1-glibc-2.3.2/arm-9tdmi-linux-gnu/bin/arm-9tdmi-linux-gnu-
[tekkamanninja@Tekkaman-Ninja busybox-1.9.1]$ make menuconfig
在原有的基礎上修改如下：
Busybox Settings --->
Installation Options --->
[*] Don't use /usr
(/home/tekkamanninja/working/nfs/rootfs) BusyBox installation prefix
Busybox Library Tuning --->
[*] Support for /etc/networks
[*] Additional editing keys
[*] vi-style line editing commands
(15) History size
[*] History saving
[*] Tab completion
[*] Username completion
[*] Fancy shell prompts
Login/Password Management Utilities --->選項全部N掉，后面單獨使用TinyLogin。（因?yàn)榧傻暮孟癫皇呛芎糜?，我自己的?jīng)驗是這樣）
Linux Module Utilities --->
[N] Support version 2.2.x to 2.4.x Linux kernels
Shells --->
--- Ash Shell Options 下的選項全選
[tekkamanninja@Tekkaman-Ninja busybox-1.9.1]$ make
......
LINK busybox_unstripped
Trying libraries: crypt m
Library crypt is needed
Library m is needed
Final link with: crypt m
[tekkamanninja@Tekkaman-Ninja busybox-1.9.1]$ make install
我是動態編譯所以查看一下需要的動態庫
[tekkamanninja@Tekkaman-Ninja busybox-1.9.1]$ /home/tekkamanninja/working/gcc4.1.1/gcc-4.1.1-glibc-2.3.2/arm-9tdmi-linux-gnu/bin/arm-9tdmi-linux-gnu-readelf -d busybox
Dynamic section at offset 0xac014 contains 22 entries:
Tag Type Name/Value
0x00000001 (NEEDED) Shared library: [libcrypt.so.1]
0x00000001 (NEEDED) Shared library: [libm.so.6]
0x00000001 (NEEDED) Shared library: [libc.so.6]
0x0000000c (INIT) 0xc0f0
0x0000000d (FINI) 0x97608
0x00000004 (HASH) 0x80e8
0x00000005 (STRTAB) 0xa3c0
0x00000006 (SYMTAB) 0x8b30
0x0000000a (STRSZ) 3371 (bytes)
0x0000000b (SYMENT) 16 (bytes)
0x00000015 (DEBUG) 0x0
0x00000003 (PLTGOT) 0xbc0ec
0x00000002 (PLTRELSZ) 2976 (bytes)
0x00000014 (PLTREL) REL
0x00000017 (JMPREL) 0xb550
0x00000011 (REL) 0xb4e0
0x00000012 (RELSZ) 112 (bytes)
0x00000013 (RELENT) 8 (bytes)
0x6ffffffe (VERNEED) 0xb400
0x6fffffff (VERNEEDNUM) 3
0x6ffffff0 (VERSYM) 0xb0ec
0x00000000 (NULL) 0x0
（3）修改和創建必要的文件。
[tekkamanninja@Tekkaman-Ninja busybox-1.9.1]$ cp -a examples/bootfloppy/etc/* /home/tekkamanninja/working/nfs/rootfs/etc/
[tekkamanninja@Tekkaman-Ninja busybox-1.9.1]$ cd ../../nfs/rootfs/etc/
1、增加為SHELL導入全局變量的文件/etc/profile
[tekkamanninja@Tekkaman-Ninja etc]$ kwrite profile
# /etc/profile: system-wide .profile file for the Bourne shells
echo
echo "Processing /etc/profile... "
# no-op
# Set search library path
echo "Set search library path in /etc/profile"
export LD_LIBRARY_PATH=/lib:/usr/lib
# Set user path
echo "Set user path in /etc/profile"
PATH=/bin:/sbin:/usr/bin:/usr/sbin
export PATH
# Set PS1
#注意：ash 除了SHELL變量外，支持\u、\h、\W、\$、\!、\n、\w 、\nnn（ASCII字符對應的八進制數）
#以及\e[xx;xxm (彩色特效)等等！
#而且前面還要多加一個 '\'！
echo "Set PS1 in /etc/profile"
export PS1="\\e[05;32m[$USER@\\w\\a]\\$\\e[00;34m"
echo "Done"
echo
2、增加初始化文件
[tekkamanninja@Tekkaman-Ninja etc]$ kwrite inittab ::sysinit:/etc/init.d/rcS
::respawn:-/bin/login
::restart:/sbin/init
::ctrlaltdel:/sbin/reboot
::shutdown:/bin/umount -a -r
::shutdown:/sbin/swapoff -a
[tekkamanninja@Tekkaman-Ninja etc]$ kwrite fstab proc /proc proc defaults 0 0
none /tmp ramfs defaults 0 0
mdev /dev ramfs defaults 0 0
sysfs /sys sysfs defaults 0 0
3、增加初始化腳本
[tekkamanninja@Tekkaman-Ninja etc]$ kwrite init.d/rcS
#! /bin/sh
echo "----------mount all"
/bin/mount -a
echo "----------Starting mdev......"
/bin/echo /sbin/mdev > /proc/sys/kernel/hotplug
mdev -s
echo "*********************************************************"
echo " Tekkaman Ninja 2440 Rootfs(nfs) 2008.2 "
echo " Love Linux ! ! @@ Love Ke Ke ! ! "
echo "********************************************************"
4、刪除備份文件
[tekkamanninja@Tekkaman-Ninja etc]$ rm *~ init.d/*~
5、為mdev創建配置文件
[tekkamanninja@Tekkaman-Ninja etc]$ vi mdev.conf
創建一個mdev.conf文件，內容可有可無。
（4）為使用用戶登錄功能移植TinyLogin
1、下載
從http://tinylogin.busybox.net/ 下載tinylogin-snapshot.tar.bz2，并解壓.
[tekkamanninja@Tekkaman-Ninja source]$ tar -xjvf tinylogin-snapshot.tar.bz2
2、修改tinyLogin的Makefile
[tekkamanninja@Tekkaman-Ninja source]$ cd tinylogin
[tekkamanninja@Tekkaman-Ninja tinylogin]$ kwrite Makefile
指明tinyLogin使用自己的算法來處理用戶密碼 USE_SYSTEM_PWD_GRP = false
......
CROSS =/home/tekkamanninja/working/gcc4.1.1/gcc-4.1.1-glibc-2.3.2/arm-9tdmi-linux-gnu/bin/arm-9tdmi-linux-gnu-
CC = $(CROSS)gcc
AR = $(CROSS)ar
STRIPTOOL = $(CROSS)strip
3、 編譯并安裝 [tekkamanninja@Tekkaman-Ninja tinylogin]$ make PREFIX=/home/tekkamanninja/working/nfs/rootfs install
Aborting install -- You must be root, otherwise I can't.
make tinylogin be setuid root, which will cause it to fail.
make: *** [install] 錯誤 1
[tekkamanninja@Tekkaman-Ninja tinylogin]$su
口令：
[root@Tekkaman-Ninja tinylogin]# make PREFIX=/home/tekkamanninja/working/nfs/rootfs install
[root@Tekkaman-Ninja tinylogin]# exit
exit
我是動態編譯所以查看一下需要的動態庫
[tekkamanninja@Tekkaman-Ninja tinylogin]$ /home/tekkamanninja/working/gcc4.1.1/gcc-4.1.1-glibc-2.3.2/arm-9tdmi-linux-gnu/bin/arm-9tdmi-linux-gnu-readelf -d tinylogin
Dynamic section at offset 0x9670 contains 21 entries:
Tag Type Name/Value
0x00000001 (NEEDED) Shared library: [libcrypt.so.1]
0x00000001 (NEEDED) Shared library: [libc.so.6]
0x0000000c (INIT) 0x9c40
0x0000000d (FINI) 0x10160
0x00000004 (HASH) 0x8128
0x00000005 (STRTAB) 0x9070
0x00000006 (SYMTAB) 0x85e0
0x0000000a (STRSZ) 1430 (bytes)
0x0000000b (SYMENT) 16 (bytes)
0x00000015 (DEBUG) 0x0
0x00000003 (PLTGOT) 0x19740
0x00000002 (PLTRELSZ) 1064 (bytes)
0x00000014 (PLTREL) REL
0x00000017 (JMPREL) 0x9818
0x00000011 (REL) 0x97c8
0x00000012 (RELSZ) 80 (bytes)
0x00000013 (RELENT) 8 (bytes)
0x6ffffffe (VERNEED) 0x9758
0x6fffffff (VERNEEDNUM) 2
0x6ffffff0 (VERSYM) 0x9606
0x00000000 (NULL) 0x0
創建創建賬號及密碼文件: [tekkamanninja@Tekkaman-Ninja tinylogin]$ cd ../../nfs/rootfs/etc/
[tekkamanninja@Tekkaman-Ninja etc]$ su
口令：
[root@Tekkaman-Ninja etc]# cp /etc/passwd . ;cp /etc/shadow . ;cp /etc/group .
[root@Tekkaman-Ninja etc]# kwrite passwd
root:x:0:0:root:/root:/bin/sh
[root@Tekkaman-Ninja etc]# kwrite group
root:x:0:root
[root@Tekkaman-Ninja etc]# kwrite shadow
root:$1$N8K8eEQe$.XkJo3xcsjOE6vo1jW9Nk/:13923:0:99999:7:::
[root@Tekkaman-Ninja etc]# rm *~
rm：是否刪除 普通文件 “group~”? y
rm：是否刪除 普通文件 “passwd~”? y
rm：是否刪除 普通文件 “shadow~”? y
[root@Tekkaman-Ninja etc]# exit
exit
[tekkamanninja@Tekkaman-Ninja etc]$
這 3個文件是從Host中拷貝過來的，只留下root賬號。
那么現在 root的登陸密碼和Host的登陸口令一致了，可以登錄后再修改以及創建新用戶。( 若使用以上文件，則root密碼為tekkaman)
拷貝必需的動態庫文件 [tekkamanninja@Tekkaman-Ninja lib]$ cp -d /home/tekkamanninja/working/gcc4.1.1/gcc-4.1.1-glibc-2.3.2/arm-9tdmi-linux-gnu/arm-9tdmi-linux-gnu/lib/ld* .
cp: 略過目錄 “/home/tekkamanninja/working/gcc4.1.1/gcc-4.1.1-glibc-2.3.2/arm-9tdmi-linux-gnu/arm-9tdmi-linux-gnu/lib/ldscripts”
[tekkamanninja@Tekkaman-Ninja lib]$ cp /home/tekkamanninja/working/gcc4.1.1/gcc-4.1.1-glibc-2.3.2/arm-9tdmi-linux-gnu/arm-9tdmi-linux-gnu/lib/libc-2.3.2.so .;cp -d /home/tekkamanninja/working/gcc4.1.1/gcc-4.1.1-glibc-2.3.2/arm-9tdmi-linux-gnu/arm-9tdmi-linux-gnu/lib/libc.so.6 .
[tekkamanninja@Tekkaman-Ninja lib]$ cp /home/tekkamanninja/working/gcc4.1.1/gcc-4.1.1-glibc-2.3.2/arm-9tdmi-linux-gnu/arm-9tdmi-linux-gnu/lib/libm-* . ;cp -d /home/tekkamanninja/working/gcc4.1.1/gcc-4.1.1-glibc-2.3.2/arm-9tdmi-linux-gnu/arm-9tdmi-linux-gnu/lib/libm.s* .
[tekkamanninja@Tekkaman-Ninja lib]$ cp /home/tekkamanninja/working/gcc4.1.1/gcc-4.1.1-glibc-2.3.2/arm-9tdmi-linux-gnu/arm-9tdmi-linux-gnu/lib/libcrypt-* . ;cp -d /home/tekkamanninja/working/gcc4.1.1/gcc-4.1.1-glibc-2.3.2/arm-9tdmi-linux-gnu/arm-9tdmi-linux-gnu/lib/libcrypt.s* .
以上是最基本的文件。
一個最基本根文件系統構建完成！未壓縮的文件系統總大小不到3M。
以下是啟動信息: U-Boot 1.3.1 (Feb 18 2008 - 16:04:40)
DRAM: 64 MB
Flash: 1 MB
NAND: NAND flash probing at 0x4E000000
64 MB
In: serial
Out: serial
Err: serial
Hit any key to stop autoboot: 0
dm9000 i/o: 0x20000300, id: 0x90000a46
MAC: 08:08:08:08:12:27
operating at 100M full duplex mode
File transfer via NFS from server 192.168.1.22; our IP address is 192.168.1.2
Filename '/home/tekkamanninja/working/nfs/zImage.img'.
Load address: 0x30008000
Loading: #################################################################
#################################################################
#################################################################
#################################################################
#######################################################
done
Bytes transferred = 1611092 (189554 hex)
## Booting image at 30008000 ...
Image Name: tekkamanninja
Created: 2008-02-19 0:48:31 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1611028 Bytes = 1.5 MB
Load Address: 30008000
Entry Point: 30008040
Verifying Checksum ... OK
XIP Kernel Image ... OK
Starting kernel ...
Uncompressing Linux........................................................................................................ done, booting the kernel.
Linux version 2.6.24 (tekkamanninja@Tekkaman-Ninja) (gcc version 4.1.1) #4 Tue Feb 19 08:48:15 CST 2008
CPU: ARM920T [41129200] revision 0 (ARMv4T), cr=c0007177
Machine: Tekkaman2440
Memory policy: ECC disabled, Data cache writeback
CPU S3C2440A (id 0x32440001)
S3C244X: core 405.000 MHz, memory 101.250 MHz, peripheral 50.625 MHz
S3C24XX Clocks, (c) 2004 Simtec Electronics
CLOCK: Slow mode (1.500 MHz), fast, MPLL on, UPLL on
CPU0: D VIVT write-back cache
CPU0: I cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets
CPU0: D cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
Kernel command line: noinitrd root=/dev/nfs rw nfsroot=192.168.1.22:/home/tekkamanninja/working/nfs/rootfs ip=192.168.1.2:192.168.1.22::255.255.255.0 console=ttySAC0,115200 init=/linuxrc mem=64M
irq: clearing pending ext status 00000200
irq: clearing subpending status 00000002
PID hash table entries: 256 (order: 8, 1024 bytes)
timer tcon=00500000, tcnt a4ca, tcfg 00000200,00000000, usec 00001e57
Console: colour dummy device 80x30
console [ttySAC0] enabled
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 64MB = 64MB total
Memory: 61440KB available (2980K code, 309K data, 120K init)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
net_namespace: 64 bytes
NET: Registered protocol family 16
S3C2410 Power Management, (c) 2004 Simtec Electronics
S3C2440: Initialising architecture
S3C2440: IRQ Support
S3C2440: Clock Support, DVS off
S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics
DMA channel 0 at c4800000, irq 33
DMA channel 1 at c4800040, irq 34
DMA channel 2 at c4800080, irq 35
DMA channel 3 at c48000c0, irq 36
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
NetWinder Floating Point Emulator V0.97 (double precision)
JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
fuse init (API version 7.9)
yaffs Feb 15 2008 10:10:34 Installing.
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
s3c2440-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2440
s3c2440-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2440
s3c2440-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2440
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: module loaded
usbcore: registered new interface driver ub
dm9000 Ethernet Driver
eth0: dm9000 at f6100300,f6100304 IRQ 51 MAC: 08:08:08:08:12:27
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
S3C24XX NAND Driver, (c) 2004 Simtec Electronics
s3c2440-nand s3c2440-nand: Tacls=1, 9ns Twrph0=4 39ns, Twrph1=1 9ns
NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit)
Scanning device for bad blocks
Bad eraseblock 3579 at 0x037ec000
Creating 7 MTD partitions on "NAND 64MiB 3,3V 8-bit":
0x00000000-0x00030000 : "U-Boot-1.3.1"
0x00030000-0x00040000 : "U-Boot-1.3.1 Parameter"
0x00040000-0x00500000 : "Linux2.6.24 Kernel(JFFS2)"
0x00500000-0x00a00000 : "Root(cramfs)"
0x00a00000-0x00f00000 : "Root(JFFS2)"
0x00f00000-0x01400000 : "Root(YAFFS)"
0x01400000-0x04000000 : "DATA"
s3c2410-ohci s3c2410-ohci: S3C24XX OHCI
s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1
s3c2410-ohci s3c2410-ohci: irq 42, io mem 0x49000000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usb usb1: Product: S3C24XX OHCI
usb usb1: Manufacturer: Linux 2.6.24 ohci_hcd
usb usb1: SerialNumber: s3c24xx
usbcore: registered new interface driver libusual
mice: PS/2 mouse device common for all mice
S3C24XX RTC, (c) 2004,2006 Simtec Electronics
s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling
s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0
s3c2440-i2c s3c2440-i2c: slave address 0x10
s3c2440-i2c s3c2440-i2c: bus frequency set to 98 KHz
s3c2440-i2c s3c2440-i2c: i2c-0: S3C I2C adapter
S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled
TCP cubic registered
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
s3c2410-rtc s3c2410-rtc: setting system clock to 2008-02-20 16:01:20 UTC (1203523280)
eth0: link down
IP-Config: Complete:
device=eth0, addr=192.168.1.2, mask=255.255.255.0, gw=255.255.255.255,
host=192.168.1.2, domain=, nis-domain=(none),
bootserver=192.168.1.22, rootserver=192.168.1.22, rootpath=
Looking up port of RPC 100003/2 on 192.168.1.22
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Looking up port of RPC 100005/1 on 192.168.1.22
VFS: Mounted root (nfs filesystem).
Freeing init memory: 120K
init started: BusyBox v1.9.1 (2008-02-20 14:54:41 CST)
starting pid 781, tty '': '/etc/init.d/rcS'
----------mount all
----------Starting mdev......
*********************************************************
Tekkaman Ninja 2440 Rootfs(nfs) 2008.2
Love Linux ! ! @@ Love Ke Ke ! !
********************************************************
starting pid 785, tty '': '/bin/login'
192.168.1.2 login: root
Password:
login[785]: root login on `console
Processing /etc/profile...
Set search library path in /etc/profile
Set user path in /etc/profile
Set PS1 in /etc/profile
Done
[root@/root]#
以上我使用nfs掛載的，后面我會介紹如何掛載jffs2、cramfs以及yaffs文件系統，有了這個基本的文件系統以后，其他就好辦了！以下是這個文件系統，編譯器是gcc4.1.2（制作編譯器所用內核為2.6.24）。
http://blog.chinaunix.net/u1/34474/showart_485837.html
