VB
If MSComm1.PortOpen = True Then MSComm1.PortOpen = False
MSComm1.CommPort = i1
MSComm1.PortOpen = True
MSComm1.InputMode = comInputModeBinary
MSComm1.InBufferCount = 0
MSComm1.InputLen = 0
MSComm1.Settings = "9600,N,8,1"
MSComm1.RThreshold = 1
MSComm1.OutBufferCount = 0
C++
/****************************************************************/
//串行口初始化
if(m_ctrlComm.GetPortOpen()) //如果串口已經打開，則關閉。
m_ctrlComm.SetPortOpen(FALSE);
m_ctrlComm.SetCommPort(1); //選擇com1
if( !m_ctrlComm.GetPortOpen())
m_ctrlComm.SetPortOpen(TRUE); //打開串口
else
AfxMessageBox("不能打開串行口！");
m_ctrlComm.SetSettings("9600,n,8,1"); //波特率9600，無校驗，8個數據位，1個停止位
m_ctrlComm.SetInputMode(1); //1：表示以二進制方式檢取數據
m_ctrlComm.SetRThreshold(1); //參數1表示每當串口接收緩沖區中有多于或等于1個字符時將引發一個接收數據的OnComm事件
m_ctrlComm.SetInputLen(0); //設置當前接收區數據長度為0
m_ctrlComm.GetInput(); //先預讀緩沖區以清除殘留數據
/****************************************************************/
C#
if (this.axMSComm1.PortOpen == true)
this.axMSComm1.PortOpen = false;
this.axMSComm1.CommPort = 1;//端口
this.axMSComm1.Settings = "9600,n,8,1";//通信參數
this.axMSComm1.InputMode = MSCommLib.InputModeConstants.comInputModeBinary;//接收數據的類型
this.axMSComm1.RThreshold = 1; //接收緩沖區中接收到一個字符，就產生一次OnComm事件
//this.axMSComm1.OnComm += new EventHandler(axMSComm1_OnComm); //注冊一個OnComm事件
this.axMSComm1.SThreshold = 0;//當發送緩沖區中字符數小于該值時，MSComm控件設置Commevent屬性為ComEvSend，并產生OnComm事件。若Sthreshold屬性設置為0，則不產生OnComm事件
this.axMSComm1.RTSEnable = true;//啟用請求發送
this.axMSComm1.DTREnable = true;//接收就緒
this.axMSComm1.InputLen = 0;//一次從接收緩沖區中讀取字節數,// 使用Input時為讀取全部資料
this.axMSComm1.NullDiscard = false;
this.axMSComm1.PortOpen = true; //打開端口
為了您的安全，請只打開來源可靠的網址
打開網站 取消來自:
http://hi.baidu.com/mrmobilerobot/blog/item/d8b3577ba6e21dff0bd18779.html
