| '例子:
'Debug.Print UpNumber(-10556765765555.45,0,True )
'顯示為:
'負壹拾萬伍仟伍佰陸拾柒億陸仟伍佰柒拾陸萬伍仟伍佰伍拾伍圓肆角零分
Public Function UpNumber(ByVal Number As Double, Optional ByVal Typ As Long, Optional ByVal IsMoney As Boolean) As String
'********************************************************************************
'--------------------------------------------------------------------------------
'將阿拉伯?dāng)?shù)字轉換為大寫字符串
'Version 1.0 2002-02-06
'Version 1.1 2002-04-05 修改到支持到千億
'Version 1.2 2004-08-14 修改為支持 Typ,IsMoney 參數,轉換結果可以不是金額,支持到百萬億
'Roadbeg
'--------------------------------------------------------------------------------
'
'--------------------------------------------------------------------------------
'參數說明:
'Number 待轉換的數字,可以是小數.
'Typ 轉換類型,可選值 0,1
'0 轉換為 零,壹,貳 等
'1 轉換為 一,二,三 等
'IsMoney 是否是金額,如果是,則轉換為多少元,小數后轉換為多少角,分,反之則轉換為類似于"二點三"這種形式
'--------------------------------------------------------------------------------
'
'--------------------------------------------------------------------------------
'返回值說明:
'如果成功,返回轉換后的字符串
'如果失敗,返回空字符串
'--------------------------------------------------------------------------------
'
'--------------------------------------------------------------------------------
'注意,此函數最大只支持到百萬億
'沒有對 Typ 的值進行檢查,如果 Typ 不為 0,1 之一,將會引發錯誤.
'另,由于 Double 類型數值范圍的原因,超過百萬億,將不能顯示小數,同樣的超過十萬億只能顯示一個小數,以此類推.
'--------------------------------------------------------------------------------
'********************************************************************************
On Error GoTo Doerr Dim Result As String '返回值
Dim strNumber As String '文本型的 Number
Dim lngNumberLen As Long '文本型的 Number 的 Len
Dim strTmp As String
Dim strFirst As String, strEnd As String
Dim lngI As Long, lngJ As Long, lngTmp As Long Dim strNum(10) As String '大寫數字
Dim strUnit(16) As String '單位,比如 十,拾,萬等
Dim strUnitB(2) As String '小數后的單位
'初始化
Select Case Typ
Case 0
strNum(0) = "零": strNum(1) = "壹": strNum(2) = "貳": strNum(3) = "叁": strNum(4) = "肆"
strNum(5) = "伍": strNum(6) = "陸": strNum(7) = "柒": strNum(8) = "捌": strNum(9) = "玖"
If IsMoney Then
strUnit(0) = "圓"
strUnitB(0) = "角": strUnitB(1) = "分"
Else
strUnit(0) = "點"
End If
strUnit(1) = "拾": strUnit(2) = "佰": strUnit(3) = "仟": strUnit(4) = "萬"
strUnit(5) = "拾": strUnit(6) = "佰": strUnit(7) = "仟": strUnit(8) = "億": strUnit(9) = "拾"
strUnit(10) = "佰": strUnit(11) = "仟": strUnit(12) = "萬": strUnit(13) = "拾": strUnit(14) = "佰"
strUnit(15) = "仟"
Case 1
strNum(0) = "零": strNum(1) = "一": strNum(2) = "二": strNum(3) = "三": strNum(4) = "四"
strNum(5) = "五": strNum(6) = "六": strNum(7) = "七": strNum(8) = "八": strNum(9) = "九"
If IsMoney Then
strUnit(0) = "元"
strUnitB(0) = "角": strUnitB(1) = "分"
Else
strUnit(0) = "點"
End If
strUnit(1) = "十": strUnit(2) = "百": strUnit(3) = "千": strUnit(4) = "萬"
strUnit(5) = "十": strUnit(6) = "百": strUnit(7) = "千": strUnit(8) = "億": strUnit(9) = "十"
strUnit(10) = "百": strUnit(11) = "千": strUnit(12) = "萬": strUnit(13) = "十": strUnit(14) = "百"
strUnit(15) = "千"
Case Else
'參數錯誤
GoTo Errexit
End Select
Result = ""
If Number = 0 Then
If IsMoney Then
Result = strNum(0) & strUnit(0) & "整"
Else
Result = strNum(0)
End If
Else
If IsMoney Then
strNumber = Trim(str(FormatCurrency(Number, 2, vbTrue, vbFalse, vbFalse))) '保留兩位小數
Else
strNumber = Trim(str(Number)) '簡單的轉換為字符串型
End If
lngNumberLen = Len(strNumber)
If Left(strNumber, 1) = "-" Then '處理負數
strFirst = "負"
strNumber = Right(strNumber, lngNumberLen - 1)
lngNumberLen = lngNumberLen - 1
Else
strFirst = "" '通常不需要 =""
End If
lngI = InStrRev(strNumber, ".")
If lngI Then
strTmp = Right(strNumber, lngNumberLen - lngI)
If IsMoney Then
strTmp = strTmp & "00"
strEnd = "" '通常不需要 =""
For lngJ = 1 To 2
Result = Result & strNum(CLng(Mid$(strTmp, lngJ, 1))) & strUnitB(lngJ - 1)
Next
Else
strTmp = Right(strNumber, lngNumberLen - lngI)
For lngJ = 1 To lngNumberLen - lngI
Result = Result & strNum(CLng(Mid$(strTmp, lngJ, 1)))
Next
End If
strNumber = Left(strNumber, lngI - 1) '去除小數部分
lngNumberLen = Len(strNumber) '新的字符串長度
Else
If IsMoney Then
strEnd = "整"
Else
strEnd = ""
End If
End If
'以下為主循環部分
lngI = 0
For lngJ = lngNumberLen To 1 Step -1
lngTmp = CLng(Mid$(strNumber, lngJ, 1))
If lngTmp Then
Result = strNum(lngTmp) & strUnit(lngI) & Result
Else
If lngI = 0 Or lngI = 4 Or lngI = 8 Or lngI = 12 Then '超過 16 位不支持
Result = strNum(lngTmp) & strUnit(lngI) & Result
Else
Result = strNum(lngTmp) & Result
End If
End If
lngI = lngI + 1
Next
Result = Replace(Result, strNum(0) & strNum(0), strNum(0)) '零零", "零
Result = Replace(Result, strNum(0) & strNum(0), strNum(0)) '零零", "零
'億零萬零圓", "億圓"
Result = Replace(Result, strUnit(8) & strNum(0) & strUnit(4) & strNum(0) & strUnit(0), strUnit(8) & strUnit(0))
Result = Replace(Result, strUnit(8) & strNum(0) & strUnit(4), strUnit(8) & strNum(0)) '億零萬, "億零"
Result = Replace(Result, strUnit(4) & strNum(0) & strUnit(0), strUnit(4) & strUnit(0)) '億零萬", "億零
Result = Replace(Result, strNum(0) & strUnit(8), strUnit(8)) '零億
Result = Replace(Result, strNum(0) & strUnit(4), strUnit(4)) '零萬
Result = Replace(Result, strNum(0) & strUnit(0), strUnit(0)) '零圓
Result = Replace(Result, strNum(0) & strNum(0), strNum(0)) '零零", "零
Result = Replace(Result, strNum(0) & strNum(0), strNum(0)) '零零", "零
If IsMoney Then
Result = strFirst & Result & strEnd
Else
If Right(Result, 1) = strUnit(0) Then Result = Left(Result, Len(Result) - 1) '去除最后一個 "點"
End If
End If
Complete:
GoTo Quit
Doerr:
Errexit:
Result = ""
Quit:
UpNumber = Result
End Function |
