国产一级a片免费看高清,亚洲熟女中文字幕在线视频,黄三级高清在线播放,免费黄色视频在线看

系統優化是一個老生常談的問題了,系統優化我個人認為是必須的,一般來說,電腦硬件\系統什么都一樣,為什么有的人電腦用起來快,有的人慢?我覺得使用者本身對電腦的優化是很重要的一個因素.

代碼為:

@echo off
title Windows Xp 優化文件!
:start
cls
color 0c
MODE con: COLS=50 LINES=27
echo                Windows Xp 優化文件!
echo        Powered By medio! QQ:30371384echo.
echo          ==============================
echo          請選擇要進行的操作，然后按回車
echo          ==============================
echo.
echo              1.優化系統服務
echo.
echo              2.進行端口操作
echo.
echo              3.設置IP為192.168.1.2
echo.
echo              (局域網上網者慎用此功能)
echo.
echo              4.其它優化
echo.
echo              5.設置OEM信息
echo.
echo              6.清除根目錄下的SXS病毒
echo.
echo              7.清理系統LJ
echo.
echo              8.退出
echo.
:cho
set choice=
set /p choice=          請選擇:
IF NOT "%Choice%"=="" SET Choice=%Choice:~0,1%
if /i "%choice%"=="1" goto start2
if /i "%choice%"=="2" goto start3
if /i "%choice%"=="3" goto ip
if /i "%choice%"=="4" goto other
if /i "%choice%"=="5" goto oem
if /i "%choice%"=="6" goto virus
if /i "%choice%"=="7" goto del
if /i "%choice%"=="8" goto end
echo 選擇無效，請重新輸入
echo.
goto cho
:start2
cls
echo                Windows Xp 優化文件!
echo        Powered By ThunderRay! QQ:278832444
echo.
echo          ==============================
echo          請選擇要進行的操作，然后按回車
echo          ==============================
echo.
echo              1.優化XP系統服務
echo.
echo              2.恢復XP原系統服務
echo.
echo              3.返回主菜單
echo.
echo              4.退出
echo.
:Choice2
set choice2=
set /p choice2=          請選擇:
IF NOT "%Choice2%"=="" SET Choice2=%Choice2:~0,1%
if /i "%choice2%"=="1" goto optimize
if /i "%choice2%"=="2" goto Restore
if /i "%choice2%"=="3" goto start
if /i "%choice2%"=="4" goto end
echo 選擇無效，請重新輸入
echo.
goto Choice2
ptimize
cls
echo 開始進行優化系統服務...
sc config  Alerter start= DISABLED
sc config  ALG start= DISABLED
sc config  AppMgmt start= DEMAND
sc config  AudioSrv start= AUTO
sc config  BITS start= DEMAND
sc config  Browser start= DISABLED
sc config  CiSvc start= DISABLED
sc config  ClipSrv start= DISABLED
sc config  COMSysApp start= DEMAND
sc config  CryptSvc start= DEMAND
sc config  DcomLaunch start= AUTO
sc config  Dhcp start= DISABLED
sc config  dmadmin start= DEMAND
sc config  dmserver start= DISABLED
sc config  Dnscache start= DISABLED
sc config  ERSvc start= DISABLED
sc config  Eventlog start= AUTO
sc config  EventSystem start= DISABLED
sc config  FastUserSwitchingCompatibility start= DISABLED
sc config  helpsvc start= DISABLED
sc config  HidServ start= DISABLED
sc config  HTTPFilter start= DEMAND
sc config  ImapiService start= DISABLED
sc config  lanmanserver start= DISABLED
sc config  lanmanworkstation start= AUTO
sc config  LmHosts start= DISABLED
sc config  Messenger start= DISABLED
sc config  mnmsrvc start= DISABLED
sc config  MSDTC start= DISABLED
sc config  MSIServer start= DEMAND
sc config  NetDDE start= DISABLED
sc config  NetDDEdsdm start= DISABLED
sc config  Netlogon start= DISABLED
sc config  Netman start= DEMAND
sc config  Nla start= DISABLED
sc config  NtLmSsp start= DISABLED
sc config  NtmsSvc start= DEMAND
sc config  Nvsvc start= DISABLED
sc config  Ose start= DEMAND
sc config  PlugPlay start= AUTO
sc config  PolicyAgent start= DISABLED
sc config  ProtectedStorage start= DISABLED
sc config  RasAuto start= DEMAND
sc config  RasMan start= DEMAND
sc config  RDSessMgr start= DISABLED
sc config  RemoteAccess start= DISABLED
sc config  RemoteRegistry start= DISABLED
sc config  RpcLocator start= DEMAND
sc config  RpcSs start= AUTO
sc config  SamSs start= DISABLED
sc config  SCardSvr start= DISABLED
sc config  Schedule start= DISABLED
sc config  seclogon start= DISABLED
sc config  SENS start= DISABLED
sc config  SharedAccess start= DISABLED
sc config  ShellHWDetection start= DISABLED
sc config  Spooler start= DEMAND
sc config  srservice start= DISABLED
sc config  SSDPSRV start= DISABLED
sc config  Stisvc start= DISABLED
sc config  Swprv start= DISABLED
sc config  SysmonLog start= DISABLED
sc config  TapiSrv start= DEMAND
sc config  TermService start= DISABLED
sc config  Themes start= AUTO
sc config  TlntSvr start= DISABLED
sc config  TrkWks start= DISABLED
sc config  UMWdf start= DISABLED
sc config  upnphost start= DEMAND
sc config  UPS start= DISABLED
sc config  VSS start= DISABLED
sc config  W32Time start= DISABLED
sc config  WebClient start= DISABLED
sc config  winmgmt start= AUTO
sc config  WmdmPmSN start= DISABLED
sc config  Wmi start= DEMAND
sc config  WmiApSrv start= DISABLED
sc config  wuauserv start= DISABLED
sc config  WZCSVC start= DISABLED
sc config  wscsvc start= DISABLED
sc config  xmlprov start= DEMAND
echo 優化XP系統服務結束,按任意鍵返回!
pause >nul
goto start2
:Restore
cls
echo 開始恢復XP原系統服務...
sc config  Alerter start= DISABLED
sc config  ALG start= DEMAND
sc config  AppMgmt start= DEMAND
sc config  AudioSrv start= AUTO
sc config  BITS start= DEMAND
sc config  Browser start= AUTO
sc config  CiSvc start= DEMAND
sc config  ClipSrv start= DISABLED
sc config  COMSysApp start= DEMAND
sc config  CryptSvc start= AUTO
sc config  DcomLaunch start= AUTO
sc config  Dhcp start= AUTO
sc config  dmadmin start= DEMAND
sc config  dmserver start= AUTO
sc config  Dnscache start= AUTO
sc config  ERSvc start= AUTO
sc config  Eventlog start= AUTO
sc config  EventSystem start= DEMAND
sc config  FastUserSwitchingCompatibility start= DEMAND
sc config  helpsvc start= AUTO
sc config  HidServ start= DISABLED
sc config  HTTPFilter start= DEMAND
sc config  ImapiService start= DEMAND
sc config  lanmanserver start= AUTO
sc config  lanmanworkstation start= AUTO
sc config  LmHosts start= AUTO
sc config  Messenger start= DISABLED
sc config  mnmsrvc start= DEMAND
sc config  MSDTC start= DEMAND
sc config  MSIServer start= DEMAND
sc config  NetDDE start= DISABLED
sc config  NetDDEdsdm start= DISABLED
sc config  Netlogon start= DEMAND
sc config  Netman start= DEMAND
sc config  Nla start= DEMAND
sc config  NtLmSsp start= DEMAND
sc config  NtmsSvc start= DEMAND
sc config  PlugPlay start= AUTO
sc config  PolicyAgent start= AUTO
sc config  ProtectedStorage start= AUTO
sc config  RasAuto start= DEMAND
sc config  RasMan start= DEMAND
sc config  RDSessMgr start= DEMAND
sc config  RemoteAccess start= DISABLED
sc config  RemoteRegistry start= AUTO
sc config  RpcLocator start= DEMAND
sc config  RpcSs start= AUTO
sc config  RSVP start= DEMAND
sc config  SamSs start= AUTO
sc config  SCardSvr start= DEMAND
sc config  Schedule start= AUTO
sc config  seclogon start= AUTO
sc config  SENS start= AUTO
sc config  SharedAccess start= AUTO
sc config  ShellHWDetection start= AUTO
sc config  Spooler start= AUTO
sc config  srservice start= DISABLED
sc config  SSDPSRV start= DEMAND
sc config  stisvc start= DEMAND
sc config  SwPrv start= DEMAND
sc config  SysmonLog start= DEMAND
sc config  TapiSrv start= DEMAND
sc config  TermService start= DEMAND
sc config  Themes start= AUTO
sc config  TlntSvr start= DISABLED
sc config  TrkWks start= AUTO
sc config  UMWdf start= DEMAND
sc config  upnphost start= DEMAND
sc config  UPS start= DEMAND
sc config  VSS start= DEMAND
sc config  W32Time start= AUTO
sc config  WebClient start= AUTO
sc config  winmgmt start= AUTO
sc config  WmdmPmSN start= DEMAND
sc config  Wmi start= DEMAND
sc config  WmiApSrv start= DEMAND
sc config  wscsvc start= AUTO
sc config  wuauserv start= AUTO
sc config  WZCSVC start= AUTO
sc config  xmlprov start= DEMAND
echo 恢復XP原系統服務結束,按任意鍵返回!
pause >nul
goto start2
:start3
cls
echo                Windows Xp 優化文件!
echo        Powered By ThunderRay! QQ:278832444
echo.
echo          ==============================
echo          請選擇要進行的操作，然后按回車
echo          ==============================
echo.
echo              1.封殺135,445端口
echo.
echo              2.恢復135,445端口
echo.
echo              3.返回主菜單
echo.
echo              4.退出
echo.
:Choice3
set choice3=
set /p choice3=          請選擇:
IF NOT "%Choice3%"=="" SET Choice2=%Choice2:~0,1%
if /i "%choice3%"=="1" goto killport
if /i "%choice3%"=="2" goto openport
if /i "%choice3%"=="3" goto start
if /i "%choice3%"=="4" goto end
echo 選擇無效，請重新輸入
echo.
goto Choice3
:killport
cls
echo 開始封殺135,445端口...
reg add HKLM\SOFTWARE\Microsoft\Ole /v EnableDCOM /d N /f
reg add HKLM\SOFTWARE\Microsoft\Rpc /v "DCOM Protocols" /t REG_MULTI_SZ /d ncacn_spx\0ncacn_nb_nb\0ncacn_nb_ipx\0 /f
sc config  MSDTC start= DISABLED
reg add HKLM\SYSTEM\CurrentControlSet\Services\NetBT\Parameters /v SMBDeviceEnabled /t REG_DWORD /d 0 /f
echo 封殺135,445端口結束,按任意鍵返回!
pause >nul
goto start3
penport
cls
echo 開始恢復135,445端口...
reg add HKLM\SOFTWARE\Microsoft\Ole /v EnableDCOM /d Y /f
reg add HKLM\SOFTWARE\Microsoft\Rpc /v "DCOM Protocols" /t REG_MULTI_SZ /d ncacn_spx\0ncacn_nb_nb\0ncacn_nb_ipx\0ncacn_ip_tcp\0 /f
sc config  MSDTC start= AUTO
reg add HKLM\SYSTEM\CurrentControlSet\Services\NetBT\Parameters /v SMBDeviceEnabled /t REG_DWORD /d 1 /f
echo 恢復135,445端口結束,按任意鍵返回!
pause >nul
goto start3
:ip
cls
echo 開始設置IP地址...
netsh interface ip set address name="本地連接" static 192.168.1.2 255.255.255.0
echo 設置IP地址結束,按任意鍵返回!
pause >nul
goto start
ther
cls
echo 開始進行其它優化...
taskkill  /im TIMPlatform.exe /f
del /f /s /q C:\Progra~1\Tencent\QQ\TIMPlatform.exe
del /f /s /q D:\Progra~1\Tencent\QQ\TIMPlatform.exe
taskkill  /im realsched.exe /f
del /f /s /q C:\Progra~1\Common~1\Real\Update_OB\realsched.exe
@rem 刪除運行QQ和Real時啟動的多余程序
reg delete HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Run /va /f
reg delete HKCR\Software\Microsoft\Windows\CurrentVersion\Run /va /f
reg delete "HKLM\SOFTWARE\Microsoft\Shared Tools\MSConfig\startupreg" /f
del "C:\Documents and Settings\All Users\「開始」菜單\程序\啟動\*.*" /q /f
del "C:\Documents and Settings\Default User\「開始」菜單\程序\啟動\*.*" /q /f
del "%userprofile%\「開始」菜單\程序\啟動\*.*" /q /f
@rem 刪除多余的啟動項
regsvr32 /u /s igfxpph.dll
reg delete HKCR\Directory\Background\shellex\ContextMenuHandlers /f
reg add HKCR\Directory\Background\shellex\ContextMenuHandlers\new /ve /d {D969A300-E7FF-11d0-A93B-00A0C90F2719}
reg delete HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Run /v HotKeysCmds /f
reg delete HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Run /v IgfxTray /f
@rem 刪除桌面多余的右鍵菜單
sfc /purgecache
@rem 消除系統緩存
regsvr32 /u /s zipfldr.dll
@rem 取消ZIP文件夾功能
reg add "HKCU\Control Panel\Desktop" /v AutoEndTasks /t REG_DWORD /d 1 /f
reg add "HKCU\Control Panel\Desktop" /v HungAppTimeout /d 50 /f
reg add "HKCU\Control Panel\Desktop" /v WaitToKillAppTimeout /d 200 /f
@rem 加快關機速度
reg add "HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\PrefetchParameters" /v EnablePrefetcher /t REG_DWORD /d 1 /f
@rem 啟動條滾動一次
reg add HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer /v AlwaysUnloadDLL /t REG_DWORD /d 1 /f
@rem 清除內存中不被使用的DLL文件
reg add "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AeDebug" /v Auto /d 0 /f
@rem 關閉華醫生
reg add "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon" /v SFCDisable /t REG_DWORD /d 4294967197 /f
@rem 禁用文件保護
reg add "HKCU\Software\Microsoft\Windows\CurrentVersion\Internet Settings" /v MaxConnectionsPer1_0Server /t REG_DWORD /d 8 /f
reg add "HKCU\Software\Microsoft\Windows\CurrentVersion\Internet Settings" /v MaxConnectionsPerServer /t REG_DWORD /d 8 /f
@rem IE下載多線程
reg add HKU\.DEFAULT\Software\Microsoft\Windows\CurrentVersion\Explorer /v Link /t REG_BINARY /d 00000000 /f
@rem 去掉快捷方式字樣
reg add HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\policies\Explorer /v NoLowDiskSpaceChecks /t REG_DWORD /d 1 /f
@rem 取消磁盤空間太小提示
reg add HKLM\SYSTEM\CurrentControlSet\Control\FileSystem /v ConfigFileAllocSize /t REG_DWORD /d 500 /f
@rem 優化文件系統
reg add HKCU\Console /v LoadConIme /t REG_DWORD /d 0 /f
@rem 運行CMD時不自動加載Conime
reg add HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\policies\system /v dontdisplaylastusername /t REG_DWORD /d 1 /f
@rem 不顯示上次登陸用戶名
reg add HKLM\SYSTEM\CurrentControlSet\Control\Lsa /v restrictanonymous /t REG_DWORD /d 1 /f
@rem 不允許 SAM帳戶和共享的匿名枚舉
reg add HKLM\SYSTEM\ControlSet001\Control\CrashControl /v AutoReboot /t REG_DWORD /d 0 /f
reg add HKLM\SYSTEM\ControlSet001\Control\CrashControl /v CrashDumpEnabled /t REG_DWORD /d 0 /f
reg add HKLM\SYSTEM\ControlSet001\Control\CrashControl /v DumpFile /t REG_EXPAND_SZ /d %SystemRoot%\MEMORY.DMP /f
reg add HKLM\SYSTEM\ControlSet001\Control\CrashControl /v LogEvent /t REG_DWORD /d 0 /f
reg add HKLM\SYSTEM\ControlSet001\Control\CrashControl /v MinidumpDir /t REG_EXPAND_SZ /d %SystemRoot%\Minidump /f
reg add HKLM\SYSTEM\ControlSet001\Control\CrashControl /v Overwrite /t REG_DWORD /d 1 /f
reg add HKLM\SYSTEM\ControlSet001\Control\CrashControl /v SendAlert /t REG_DWORD /d 0 /f
@rem 系統失敗的幾個勾全都不選
reg add HKLM\SOFTWARE\Microsoft\PCHealth\ErrorReporting /v DoReport /t REG_DWORD /d 0 /f
reg add HKLM\SOFTWARE\Microsoft\PCHealth\ErrorReporting /v ShowUI /t REG_DWORD /d 0 /f
@rem 禁用錯誤匯報,但在發生嚴重錯誤時通知我的勾不選
reg add HKCR\CLSID\{450D8FBA-AD25-11D0-98A8-0800361B1103} /v SortOrderIndex /t REG_DWORD /d 54 /f
@rem 桌面第一顯示我的電腦
reg add HKLM\SOFTWARE\Classes\*\shell\OpenInNotepad /ve /d 使用記事本打開 /f
reg add HKLM\SOFTWARE\Classes\*\shell\OpenInNotepad\command /ve /d "notepad.exe \"%%1%\"" /f
reg add HKCR\Directory\shell\DOS /ve /d 使用DOS瀏覽 /f
reg add HKCR\Directory\shell\DOS\Command /ve /d "cmd.exe /k \"cd %%L%" /f
@rem 在文件右鍵菜單增加"使用記事本打開"&在文件夾右鍵增加使用DOS瀏覽
reg add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" /v Favorites /t REG_EXPAND_SZ /d D:\Favorites /f
reg add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" /v Personal /t REG_EXPAND_SZ /d "D:\My Documents" /f
@rem 將我的文檔與收藏夾放在D盤下
echo 其它優化結束,按任意鍵返回!
pause >nul
goto start
:OEM
cls
echo 開始設置OEM信息...
Copy /y OEM\*.* %windir%\system32\*.* >nul
echo OEM設置信息結束,按任意鍵返回!
pause >nul
goto start
:virus
cls
echo 開始清除根目錄下的SXS病毒...
FOR %%a IN ( C: D: E: F: G: H: I: J: K: L: M: N: O: P: Q: R: S: T: U: V: W: X: Y: Z: ) DO ATTRIB -R -H -S -A %%a\SXS.EXE & DEL /F /Q /A -R -H -S -A %%a\SXS.EXE & ATTRIB -R -H -S -A %%a\AUTORUN.INF & DEL /F /Q /A -R -H -S -A %%a\AUTORUN.INF
echo 清除根目錄下的SXS病毒結束,按任意鍵返回!
pause >nul
goto start
:del
cls
echo 開始清理系統LJ文件...
del /f /s /q %systemdrive%\*.tmp
del /f /s /q %systemdrive%\*._mp
del /f /s /q %systemdrive%\*.log
del /f /s /q %systemdrive%\*.gid
del /f /s /q %systemdrive%\*.chk
del /f /s /q %systemdrive%\*.old
del /f /s /q %systemdrive%\recycled\*.*
del /f /s /q %windir%\*.bak
del /f /s /q %windir%\prefetch\*.*
rd /s /q %windir%\temp & md %windir%\temp
del /f /q %userprofile%\cookies\*.*
del /f /q %userprofile%\recent\*.*
del /f /s /q "%userprofile%\Local Settings\Temporary Internet Files\*.*"
del /f /s /q "%userprofile%\Local Settings\Temp\*.*"
del /f /s /q "%userprofile%\recent\*.*"
echo 清理系統LJ文件結束,按任意鍵返回!
echo.
pause >nul
goto start
:end
exit

使用方法：請粘貼到文本文檔中，保存為.bat文件即可 如無法修改文件后綴 請?jiān)?span id="moiyehiw" class="t_tag" href="tag.php?name=%b9%a4%be%df">工具-文件夾選項中把“隱藏文件的擴展名”一項取消即可.也可直接將原有的.DAT文件打開,用上面的內容覆蓋,即為可用.